Removes surface oils using the Zebra Belt Skimmer. Our 1” wide, 18” reach, poly belt unit, which removes 1 gallon of oil per hour, is standard and requires only a 2” diameter opening. A 2' oil discharge hose is provided (not shown). Quickly mounts to any 1/4” wall using Zebra Lockjaw™ Clean fluid lifted from holding vessel (6' flexible hose included) Rugged, electric diaphragm pump transfers the cleaned fluid to your evaporation station. 1.5 gpm, 115v, 60Hz, with 23' waterlift and 3/8” FPT outlet fitting. Transfer hose not included.

Zebra EvapoTreat™

Pretreat & Transfer Waste Fluids for Evaporation Efficiency

• Combines oil skimming and waste fluids transfer into a single unit
• Increase evaporation rate by removing surface oils which prevent water-based fluid from vaporizing efficiently
• Prevent sludge accumulation and maintenance
• Reduce hot plate or burner cleaning and replacement
• Increase value of segregated waste oil
• Easily mounts to drums, totes, or other wastewater holding vessels

Selection Guide