| |
Do It Yourself Components
Diaphragm & Centrifugal Pumps, Filters, Hoses & Connectors |
| When you want to tackle your own project, Zebra is here to help by offering main components needed- from centrifugal to diaphragm pumps, to filters, hoses, and connectors. Give us a call if you advice help along the way. |
| Hoses, Connectors, and Filters |
Air & Electric Diaphragm and Centrifugal Pumps |
Industrial-grade hoses
• Tackle almost any job
• Sold by the foot
• Various sizes available
|
 |
| SK95 |
Clear, spiral-reinforced, hose, 1 1/4” ID |
| SK97 |
Clear, braided-reinforced, hose 1/2” ID |
| SK99 |
Black flexible hose, 1/2” ID |
|
 |
|
Connectors make any job a snap
• Cam-lock or Fluid-tight
• Made of high-impact plastics
• Each connector sold separately
| SKXQXC1 |
Cam-Lock Quick Connect, Male |
| SKXQXC2 |
Cam Lock Quick Conect, Female |
| SKXQXQD1 |
Fluid-Tight Quick Connect, Male |
| SKXQXQD2 |
Fluid-Tight Quick Connect, Female |
|
|
| SKXC.75 |
Oetiker dog-ear clamp, 3/4” |
| SKXC1.5 |
Oetiker dog-ear clamp, 1 1/2” |
|
| SKXF.5.25 |
Male connecter, 1/2” ID barbed to 1/4” NPT |
| SKXF.5.5 |
Male connecter, 1/2” ID barbed to 1/2” NPT |
|
| FMXSM |
Magnetic Hose Holder for 1/2” OD hose |
| FMXLM |
Magnetic Hose Holder for 1 1/2” OD hose |
|
 |
Polyester Filter Bags
• 1 gallon capacity, 16” in length
• Sold in sets of 10
• Various pore sizes available
| FXB005X |
Poly Filter Bags, 5µ |
| FXB050X |
Poly Filter Bags, 50µ |
| FXB100X |
Poly Filter Bags, 100µ |
|
Cartridge Filters
• Reusable stainless steel or disposable cellulose
• 10” in length
• Various pore sizes available
| FMXSF150 |
Stainless Steel Filter, 150µ |
| FMXSF230 |
Stainless Steel Filter, 230µ |
| FMXSF540 |
Stainless Steel Filter, 540µ |
| FMXRFA005 |
Cellulose Filters, 5µ, pkg. of 2 |
| FMXRFA025 |
Cellulose Filters, 25µ, pkg. of 2 |
| FMXRFA050 |
Cellulose Filters, 50µ, pkg. of 2 |
|
 |
Filter Housing
• High-impact plastic
• 3/4” NPT inlet and outlet fittings
• 14 1/4” over-all-length
• Includes filter wrench for quick change-out
| FMXFH10 |
Filter Housing for 10’ long filters |
|
 |
 T-Strainer for small jobs
• 80 mesh size stainless screening
• Clear, high-impact plastic bowl
• 1 pint capacity
• 125°F max. temperature
| FMXTS1 |
T-Strainer, 80 mesh |
|
Fluid Transfer Kit
• Great for baffled, H-shaped sumps
• Direct oil layer to where you need it for pick up
• Includes 10’ hose, elbows, fittings, clamps, and magnets. Transfer pump and oil intake attachment sold separately.
• Contact us for best set-up recommendations
FXFT.1
|
Coalescing Media
| FXCM003 |
Coalescing media, 1 ft3, 27.5 sq ft surface area, 92% void space. |
| FXCM004 |
Coalescing media, 1/2 ft3 media, 14 sq ft surface area, 92% void space. |
|
|
Air Diaphragm Pump
Inlet Size |
1/2" |
Outlet Size |
1/2" |
Flow rate, max. |
14 gpm (53.2 lpm) |
Water lift |
15' (4.5m), max. |
Temp Range |
35-150°F (2-66°C) |
Pressure Range |
20-100 psi |
Dimensions, in |
9.8x7.5x11 |
Dimensions, cm |
25x19x27cm |
Particle Size, max. |
1/8" (3.2mm) |
Part Number |
FMXP5711 |
|
 |
Air Diaphragm Pump
Inlet Size |
1/4" |
Outlet Size |
1/4" |
Flow rate, max. |
4.6 gpm (17.5 lpm) |
Water lift |
20' (6.1m), max. |
Temp Range |
35-150°F (2-66°C) |
Pressure Range |
20-100 psi |
Dimensions, in |
8x5.5x5.7 |
Dimensions, cm |
20x14x15 |
Particle Size, max. |
1/64" (.39mm) |
Part Number |
FMXP5114 |
|
 |
Electric Diaphragm Pump
Inlet Size |
3/8" FPT |
Outlet Size |
3/8" FPT |
Flow rate, max. |
1.5 gpm (5.3 lpm)@10 psi |
Water lift |
12' (3.6m) @10psi, min. |
Temp Range |
35-170°F (2-77°C) |
Pressure Range |
0-60 psi |
Volts |
115 |
Watts |
40 |
Hz |
60 |
HP, min. |
1/10 |
Dimensions, in |
7.6x3.3x4.1 |
Dimensions, cm |
19.2x8.3x10.4 |
Particle Size, max. |
1/64" (.39mm) |
Part Number |
FMXP51 |
|
 |
Centrifugal Pump
Inlet Size |
3/4" FNPT |
Outlet Size |
1/2" MNPT |
Flow rate, max. |
11 gpm |
Water lift |
20' (6.1m), max. |
Temp Range |
20-120°F (6.6-49°C) |
Volts |
115 |
Watts |
208 |
Hz |
60 |
HP, min. |
1/15 |
Dimensions, in |
7x4.4x5.4" |
Dimensions, cm |
18x10x14cm |
Particle Size, max. |
1/8" (3.2mm) |
Cord Length |
10' |
Part Number |
FXP5 |
|
 |
Centrifugal Pump
Inlet Size |
1/4" FNPT |
Outlet Size |
1/4" MNPT |
Flow rate, max. |
3 gpm |
Water lift |
7' (2.1 lpm), max. |
Temp Range |
20-120°F (6.6-49°C) |
Volts |
115 |
Watts |
36 |
Hz |
60 |
HP, min. |
1/125 |
Dimensions, in |
3.4x3.8x2.8 |
Dimensions, cm |
8.6x9.7x7.1 |
Particle Size, max. |
1/8" (3.2mm) |
Cord Length |
10' |
Part Number |
FXP3 |
|
 |
Pressure Limiter
| FXP18NAR |
Pressure Limiter for air diaphragm pumps, 85 max psi |
|
 |
|
|
|
|
