Zebra Skimmers home

Zebra Circulation Pumps Aerate Large Tanks

  • Cost-effective method to circulate large fluid volumes
  • Ideal for sumps or tanks over 100 gallons
  • Directs coolant above fluid level to create waterfall/aeration pattern
  • Includes pump, hose, and hose magnet

circulation pump Copyright Zebra Skimmers Corp.

The bacteria we're fighting within the sump thrive best when their oxygen supply is gone. When the machine is shut down for the night, the pump stops circulating coolant, traces of tramp oil float to the surface, and the oxygen supply to the fluid is cut off. This is the best time for bacteria to grow.

Your coolant's health is dependent upon whether it can "breathe". Using an aeration device when the machine pump is shut down is a simple, yet very effective method of keeping bacteria at bay and your coolant healthy.

The Zebra Circulation Pump uses oil-rated tubing and diffusers that will not degrade in our coolant environment.

For sumps or tanks below 100 gallon, use the Zebra Oxygenator or the airpowered Oxygenator.


Part Number Description Application Capacity Electrical* Dimensions (L, W, H)
FXP11.1 Centrifugal Pump 101-250 gal sump 5 gpm 110v 4" x 3 " x 4 " (100 x 76 x 100 mm)
FXP5.1 Centrifugal Pump 251-500 gal sump 11 gpm 110v 6.5" x 4.5" x 5.5" (165 x 114 x 140 mm)
* 220v models available by adding "E" to the end of part number
Download Zebra Catalog
 
METALWORKING PRODUCTS
MANAGING WATER HARDNESS
MANAGING CONCENTRATION
MANAGING pH
MANAGING TRAMP OIL
MANAGING CHIPS

Additional Products

 
Download:
Profile
profile coolant treatment
Specifications
parts circulation pumps

 

© 2011 Zebra Skimmers Corporation • Site Map
Coolant Maintenance
CoolantMaintenance.com demystifies metalworking fluid technology. Oil Skimmer Case Studies at OilSkimmerStories.com Terms of Use
Web design by Vizprowebmaster 16.12.11